Shop By Brand>Shop By Category>Z-Deals of the Month


Showing 1 - 18 of 1941234567891011Next >
20V Max XR Metal Connecting Nailer Kit
• Brushless Motor and Engine Design provides the power to sink both 1 1/2" and 2 1/2" fasteners

• Rapid Cycle Mode for speed,

• Sequential mode for accurancy

• Tip Probe guide for precision placement of fasteners
20V Max* 600ml Adhesive Dispenser - Tool Only
• Variable Speed Trigger allows for increased control over the flow of your adhesive

• Anti - Drip Feature automatically retracts the plunging rod once trigger is released preventing excess adhesive from dripping out

• Variable Spreed Dial allow for setting maximum and minimum flow rates

• Quick Connect Inter-changeable canister trays allows user to quickly change between canister sizes
Bosch 11264EVS 1-5/8 SDS-Max Combination Hammer
• Powerful 13.0-AMP motor – drives 6.5 ft.-lbs. of impact energy for professional results

• Vibration Control™ – for all day jobs, tool allows for maximum user comfort

• Constant Response™ circuitry — provides soft-start and maintains constant speed under load

• Turbo™ Power — delivers 20 percent more power in hammer-only mode

• Electro-pneumatic impact system maximizes impact force and minimizes vibration

• SDS-max® bit system — tool-free bit changes with automatic bit-locking and maximum impact energy transfer rate

• Dual-mode selector — 2 modes of operation, rotary hammer and hammer only mode

• Variable-speed dial — for accurate bit starting and controlled chipping applications
Currently Out of Stock. More on the Way
Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand
* A $40 Heavy Item Shipping Fee Will Be Added After Ordering this Item

• Portability – works seamlessly with the included Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down

• Smart Guard System – riving knife and anti-kickback pawls provide protection when a kickback occurs, while the barrier guard assembly provides a barrier helping to deter blade contact while allowing an unobstructed view of the point the blade meets the workpiece

• Powerful 15 Amp 4.0 HP Max motor – delivers 3,650 RPM and the power required for ripping in fine and rough carpentry materials, including standard 10 In. blade and dado applications

• SquareLock rip fence – engineered for enhanced clamping and trueness

• Large cast aluminum top – provides increased work space and material support with a 25 In. ripping capacity

• Soft-start circuitry – manages the intensity of motor start-up and minimizes the likelihood of tripping a circuit breaker

• Constant response circuitry – maintains speed under load
Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw, 15-Amp
* A $40 Heavy Item Shipping Fee Will Be Added After Ordering this Item

• The Axial-Glide System’s articulated hinge arms – reduce the saw’s front-to-back footprint by up to 10 In. compared to slide saws with similar capacities

• Axial-Glide System – offers more durable precision than side saw rail systems

• Powerful 15-amp motor – delivers 4,800 no-load rpm for professional cutting capacity

• Wide cutting capacities – includes 12 In. horizontal cut capacity, 5-1/2 In. vertical baseboard cut capacity against the fence and a 6 In. crown cut capacity nested against the fence (45° spring)

• Bevel lock lever and range selector – are located upfront for quick, easy settings without having to reach around behind saw

• Tall sliding 4-1/4 In. fences – for easy bevel set ups and increased crown and base molding capacity
Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw
* A $40 Heavy Item Shipping Fee Will Be Added After Ordering this Item

• The Bosch GCM12SD is a 12 In. Dual-Bevel Glide™ miter saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide™ system

• Pre-aligned Squarelock™ fences help the saw maintain precision throughout its life

• A soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort

• The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls

• Integrated expanding base extensions: 60% more left-to-right material support than leading competitor - 40 In. left to right

• Large easy-to-read uniform bevel & stainless steel miter scales: 52° left/60° right miter capacity; 47° left/47° right bevel capacity with marked detents and roof pitch angles
Bosch T4B Gravity-Rise Miter Saw Stand
* A $40 Heavy Item Shipping Fee Will Be Added After Ordering this Item

• Integrated out feed and supports — up to 18 Ft. of material support capacity

• Adjustable telescoping leveling leg — provides stability on uneven surfaces

• Adjustable height out feed — up to 12 In.

• Universal mounting system — for use with all major competitors' saws

• Integrated rubber wheels — easily move stand with saw attached from jobsite to jobsite.
Bostitch Cap Nailer Model N66BC-1
On Sale!
• Tool-free “Dial-A-Depth" adjustment sets nails to desired depths quickly and conveniently

• Lightweight magnesium design for durability

• Quick-load magazine feature provides fast and easy loading of caps and nails

• Tool-free adjustable exhaust conveniently directs exhaust away from the user

• 1" diameter caps offer superior hold power and increased productivity

• Faster than nailing by hand

Bostitch MCN150  ^StrapShot^ 1-1/2^ Metal Connector Nailer
• Compact design fits between 12" O.C. joists

• Low nail lockout prevents dry fires

• Exclusive safety system prevents misfires

• Exposed nail tip design fires in the hole for fast precise nailing

• Drives 1-1/2" paper tape collated metal connector nails (.131" - .148" diameter)

• Exposed nail tip places fastener point directly into connector holes for a fast and precise application

• In-line magazine offers balance for maneuverability

• Lightweight design for minimal fatigue
BOSTITCH RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer
• Lightweight magnesium housing for job site durability

• Zero nail lockout feature eliminates dry firing and indicates when to reload the magazine

• Nosepiece features carbide inserts for long-life performance

• Aggressive wear guards and skid pads protect the tool from damage on abrasive surfaces

• Quick-set adjustable depth guide sets nails to desire depths quickly and conveniently

• Patented single-action side load canister for fast, one-step nail loading

• Adjustable shingle guide for quick shingle spacing
BOSTITCH SBCAPS 1000 Caps for Cap Stapler and Nailer
• 1" plastic Bostitch® Caps eliminates pull-through when installing felt, house wrap and foam board insulation

• The Bostitch® Cap method proves to be 10x faster than nailing by hand

• For use with the Bostitch® Cap Stapler (SB150SLBC-1) with 5/16" crown, 18ga staples (SL5035) and Bostitch® Cap Nailer (N66BC-1) with 15 ° coil siding nails
On Sale!

• Durable top with magnet and multiple tool slots and comfort when climbing the ladder.

• 25% greater step surface* (step surface is 3.75" vs. 3" industry standard)

• Heavy duty boot with maximum slip-resistant surface area

• Pinch-resistant spreader braces provide stability

• Double-riveted steps
• SHOCKS - Active Vibration Control reduces vibration felt by the user at the handles. A Perform and Protect feature.

• 13.5 amp high-performance motor provides high performance & overload protection

• Rear handle mount increases user comfort in down-drilling applications

• Compatible with DWH050K drilling dust extraction system.

• Trigger lock on reduces user fatigue while chipping ONLY.

• 8.0 joules of impact energy provides fast drilling and powerful chipping

• Electronic variable speed dial allows the user to control the speed of drilling or chipping while maintaining speed under load

• Electronic Soft Start provides the user more control when the trigger is pulled.

• Chipping function allows for fast demolition of walls and correction work on floors.

• Compatible with DWH053K chiseling dust extraction system.
DeWalt  12''  32T General Purpose Blade
• Thin kerf for fast and smooth cutting action

• Computer balanced plate reduces vibration for improved accuracy and better finish

• Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy
DeWalt 10^ Double-Bevel Sliding Compound Mitre Saw

• Exclusive bevel detent system with 7 positive stops delivers fast accurate repeatable cuts

• Optimizes cutting accuracy

• Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings deliver an accurate, durable, and compact saw

• Best in class cross cut-capacity 12" at 45-degree angle using back-fence design

• Tall sliding fence supports up to 6-inch base molding to the left of blade and up to 3-1/2" to the right of the blade

• Bevels 0-48° for increased cut capacity

• Horizontal handle improved ergonomics provides increased comfort

• Adjustable stainless steel miter detent plate with 11 positive stops improves productivity & ensures cutting accuracy

• Machined-base fence support maintains fence perpendicularity with blade for cutting accuracy

• Exclusive cross-cut stop positions cutting head for maximum vertical cut capacity

• Vertical cut capacity nested crown up to 6-1/4"
DeWALT 12.0 Amp Corded Reciprocating Saw
On Sale!
• Powerful 12 amp motor designed for heavy-duty applications

• Keyless, lever-action blade clamp for quick and easy blade changes

• Variable speed trigger allows user to instantly control speed

• 4-position blade clamp allows for flush cutting and increased versatility

• 0-2,900 SPM and 1-1/8" stroke length for fast and efficient cutting
DeWalt 12V MAX Hand Held Wall Scanner Kit
• Patent pending sensing technologies detect five classes of embedded materials (wood, ferrous metal, non-ferrous metal, plastic and unshielded live electric behind wall surfaces up to 3 inches deep

• Scans through multiple wall surfaces including drywall, plywood, concrete and ceramic tile

• Automatic mapping feature processes all embedded materials simultaneously

• Color, 3.5 inch, LCD display for improved visibility and communication of embedded material type and location

• Tracking bar displays embedded material locations of entire mapped area (up to 9.8 feet)
DeWALT 20V Brushless 16 Gauge Finish Nailer
On Sale!
• Drives 16GA 20 degree finish nails 1-1/4" to 2-1/2" lengths

• Up to 800 nails per charge (20V MAX* 2.0Ah Battery Included)

• Multi-functional lights provide both workspace illumination and tool diagnostics

• Integrated tool-free stall release lever - quickly reset the driver blade in the event of a stall

• No-Mar tips included to prevent damage to the work surface

• Adjustable belt hook

• Tool-free selectable actuation modes - sequential Mode for precision placement and bump mode for production speed

• Tool-free jam release to quickly and easily clear jammed nails
Showing 1 - 18 of 1941234567891011Next >