Showing 1 - 18 of 2512Next >
Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand
4100-09
* A $40 Heavy Item Shipping Fee Will Be Added After Ordering this Item

• Portability – works seamlessly with the included Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down

• Smart Guard System – riving knife and anti-kickback pawls provide protection when a kickback occurs, while the barrier guard assembly provides a barrier helping to deter blade contact while allowing an unobstructed view of the point the blade meets the workpiece

• Powerful 15 Amp 4.0 HP Max motor – delivers 3,650 RPM and the power required for ripping in fine and rough carpentry materials, including standard 10 In. blade and dado applications

• SquareLock rip fence – engineered for enhanced clamping and trueness

• Large cast aluminum top – provides increased work space and material support with a 25 In. ripping capacity

• Soft-start circuitry – manages the intensity of motor start-up and minimizes the likelihood of tripping a circuit breaker

• Constant response circuitry – maintains speed under load
$749.00
Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw, 15-Amp
CM10GD
* A $40 Heavy Item Shipping Fee Will Be Added After Ordering this Item

• The Axial-Glide System’s articulated hinge arms – reduce the saw’s front-to-back footprint by up to 10 In. compared to slide saws with similar capacities

• Axial-Glide System – offers more durable precision than side saw rail systems

• Powerful 15-amp motor – delivers 4,800 no-load rpm for professional cutting capacity

• Wide cutting capacities – includes 12 In. horizontal cut capacity, 5-1/2 In. vertical baseboard cut capacity against the fence and a 6 In. crown cut capacity nested against the fence (45° spring)

• Bevel lock lever and range selector – are located upfront for quick, easy settings without having to reach around behind saw

• Tall sliding 4-1/4 In. fences – for easy bevel set ups and increased crown and base molding capacity
$779.00
Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw
GCM12SD
* A $40 Heavy Item Shipping Fee Will Be Added After Ordering this Item

• The Bosch GCM12SD is a 12 In. Dual-Bevel Glide™ miter saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide™ system

• Pre-aligned Squarelock™ fences help the saw maintain precision throughout its life

• A soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort

• The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls

• Integrated expanding base extensions: 60% more left-to-right material support than leading competitor - 40 In. left to right

• Large easy-to-read uniform bevel & stainless steel miter scales: 52° left/60° right miter capacity; 47° left/47° right bevel capacity with marked detents and roof pitch angles
$799.00
Bosch JS470E - Top-Handle Jigsaw
JS470E
• Powerful jig saw – with 7.0 amp rating

• Large die-cast aluminum footplate – with steel insert and on-board storage of bevel hex key

• Variable-speed control – includes a dial for max speed and accelerator trigger to control operating speed

• Constant Response circuitry – for consistent performance under load

• Multi-directional blade clamp – supplies superior grip of T-shank blades (does not accept U-shank blades)

• Aluminum gearbox with insulated cover – offers durability

• Toolless blade-change system – furnishes fast blade insertion and a blade-ejection lever; no need to touch hot blades

• Four orbital-action settings – provide varied blade strokes for smooth to aggressive cuts

• Internal precision control – supplies a precision-machined plunging system and low-vibration design for enhanced accuracy and extremely smooth operation

• Dust blower with on/off switch – for keeping the cut line visible and free of dust
$249.00
DeWalt 10^ Double-Bevel Sliding Compound Mitre Saw
DW717
A $40 SHIPPING CHARGE WILL BE ADDED TO THIS ITEM AFTER ORDERING

• Exclusive bevel detent system with 7 positive stops delivers fast accurate repeatable cuts

• Optimizes cutting accuracy

• Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings deliver an accurate, durable, and compact saw

• Best in class cross cut-capacity 12" at 45-degree angle using back-fence design

• Tall sliding fence supports up to 6-inch base molding to the left of blade and up to 3-1/2" to the right of the blade

• Bevels 0-48° for increased cut capacity

• Horizontal handle improved ergonomics provides increased comfort

• Adjustable stainless steel miter detent plate with 11 positive stops improves productivity & ensures cutting accuracy

• Machined-base fence support maintains fence perpendicularity with blade for cutting accuracy

• Exclusive cross-cut stop positions cutting head for maximum vertical cut capacity

• Vertical cut capacity nested crown up to 6-1/4"
$669.00
DeWALT 12.0 Amp Corded Reciprocating Saw
On Sale!
DWE305
• Powerful 12 amp motor designed for heavy-duty applications

• Keyless, lever-action blade clamp for quick and easy blade changes

• Variable speed trigger allows user to instantly control speed

• 4-position blade clamp allows for flush cutting and increased versatility

• 0-2,900 SPM and 1-1/8" stroke length for fast and efficient cutting
$129.00
$119.00
DEWALT D24000S Heavy-Duty 10-inch Wet Tile Saw with Stand
On Sale!
D24000S
A $40 SHIPPING CHARGE WILL BE ADDED TO THIS ITEM AFTER ORDERING

• Cantilevering Rail/Cart system allows for 24" ripping capacity - 18" tile on diagonal

• Stainless steel rail system is integrated into the saw frame, ensuring accurate cuts

• Plunge feature allows the user to make quick plunge cuts for electrical outlets and A/C registers

• Rear and side water attachments can be placed on tile saw to contain water run-off and to catch blade sprayoverspray from large tile keeping the water in the pan

• Compact saw frame allows for easy transport and storage in vehicle - 34" x 26"

• Only 69 lbs - allows one person to transport and set up saw

• Integrated 45/22.5° miter feature for quick angled cuts

• Dual water nozzles can be adjusted for optimal water placement on blade in order to minimize over-spray and mist
$1,100.00
$999.00
DEWALT DCS7485B FLEXVOLT 60V MAX Bare Tool Table Saw, 8-1/4^
DCS7485B
The DCS7485B 60V MAX* 8 1/4" table saw is maximized for accuracy, capacity and runtime. The brushless motor delivers the power to cut all common materials, the rack & pinion fence allows for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods. The DCS7485B is sold as tool only
MFG: DeWALT
$529.00
USUALLY SHIPS IN 1 - 2 WEEKS
DEWALT DW310K 12 Amp Heavy-Duty Reciprocating Saw Kit
DW310K
• Powerful 12 amp motor delivers the power needed for heavy-duty applications

• 0-2,700 SPM and 1-1/8" stroke length for fast and efficient cutting

• Keyless stainless steel blade clamp for quick and easy blade changes and increased reliability

• Keyless adjustable shoe easily adjusts depth of cut and extends blade life

• Variable speed trigger allows user to instantly control speed
$219.00
DEWALT DWE575 7-1/4-Inch Lightweight Circular Saw
On Sale!
DWE575
• One of the lightest saws in its class at 8.8 lbs

• 57° beveling capacity with stops at 45° and 22.5°

• Anti-snag Ball bearing lower guard provides smooth guard operation and long life in harsh environments

• Integrated dust blower function cleans the line of sight during cutting

• Clear line of sight aids in blade visibility from any angle

• 15 amp motor, powerful enough for even the toughest applications

• 2 9/16 " Depth of cut capacity provides additional versatility of applications

• Toughcord provides longer durability against cord pull outs

• Durable high grade Aluminum smooth base for accurate cuts

• On-board blade wrench storage allows for easy access to the wrench
$159.00
$139.00
DeWALT DWE575SB - 7-1/4^ Circular Saw with Electric Brake
DWE575SB
• Among the lightest saws in its class (8.8 lbs.)

• 15 amp motor delivers power for even the toughest applications

• Depth of cut capacity of 2 9/16"

• Durable high grade Aluminum smooth base for accurate cuts

• An integrated dust blower allows the user to clear its line of sight while cutting

• On-board blade wrench storage, allows for easy storage and convenience for blade changes
$189.00
Dremel US40-03 Ultra-Saw Tool Kit with 5 Accessories and 1 Attachment
US40-03
• 7.5 Amp - for faster cutting and tougher applications

• Faster speed of cut - rip through plywood and cut more metal

• 3-in-1 tool - go beyond cutting and flush cutting with surface preparation applications including rust, paint, and thinset removal

• Added durability - improved drive-train lasts 3x longer than the Saw-Max and its metal foot and guard handle tough applications

• Excellent line of sight for precise, confident cuts
$175.00
Makita 3706 Drywall Cutout 5 Amp 3,200 RPM Rotary Tool
3706
Powerful 5 AMP motor delivers 32,000 RPM for fast cutting in a wide variety of material. Accepts both 1/8" and 1/4" bits. Slim body design for optimum comfort and precise control. Lightweight at only 2.4lbs for easy handling , 2-way "Slide and Bump" on/off switch. Sealed switch for extra protection from dust and debris and a longer tool life. Tool-less depth adjustment sets the desired cutting depth quickly and easily. All ball bearings construction reduces friction and creates smooth rotation. Large and conveniently located shaft lock button for fast bit changes. Technologically advanced centrifugal for the most efficient cooling of the motor. Fan exhaust vents direct air and debris away from the operator. Durable 10 foot cord with cord guard. Convenient storage of wrench on the cord.

$129.00
USUALLY SHIPS IN 1-2 WEEKS
Makita 4329K Jig Saw – VS Orbital w/ Carrying Case
4329K
* Variable speed control dial (500-3,100 SPM) enables user to match the speed to the application for optimal cutting performance in a variety of materials
* Ergonomically designed rubberized grip for increased comfort and control
*Counterweight balancing system for reduced vibration
*Die-cast aluminum base adjusts up to 45° right or left and positive stop at 90° for solid cutting performance
*Through-the-body dust port provides optimal dust management with use of clear dust cover and vacuum
*3 orbital settings plus straight cutting with a powerful 3.9 AMP motor for use in a variety of materials
*Large trigger switch for easy operation
*Lock-on button for extended operation
*Onboard hex wrench for fast and easy blade changes and bevel adjustments
Uses Tang shank blades
$129.00
Makita 4351FCT  Barrel Grip Jig Saw
4351FCT
Makita’s Barrel Grip Jig Saw (model 4351FCT), combines power and superior feel with substantially less vibration and noise for improved cutting performance. The 4351FCT features a barrel grip design for closer-to-work cutting, and is ideal for woodworkers, cabinet makers, remodelers, and general contractors.
$299.00
Showing 1 - 18 of 2512Next >